Bernina Bernette 25 Instruction Manual - Page 37
Straight Stitches and Needle Position, Zigzag Stitches
View all Bernina Bernette 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
36 Basic Sewing Procedures Straight Stitches and Needle Position 0.0 2.0 3.5 5.0 7.0 0.5 1.0 2.0 3.0 4.5 Zigzag Stitches Changing the needle position These setting apply only to pattern 01-03, 24. The pre-set position is " 3.5", center position. Press the stitch width button to enter stitch width adjustment mode. When you turn the selector wheel counter clockwise, the needle position will move to the left. When you turn the selector wheel clockwise, the needle position will move to the right. Changing the stitch length Press the stitch length button to enter stitch length adjustment mode. To shorten the stitch length, turn the selector wheel counter clockwise. For a longer stitch length, turn the selector wheel clockwise. Generally speaking, the thicker the fabric, thread and needle, the longer the stitch should be. 0.0 1.0 3.0 5.0 7.0 0.5 1.0 2.0 3.0 4.5 Adjusting the stitch width The maximum zigzag stitch width for zigzag stitching is "7.0"; however, the width can be reduced on any patterns. Press the stitch width button to enter stitch width adjustment mode, the stitch width can be adjusted between "0.0-7.0 mm". Adjusting the stitch length The density of zigzag stitches increase as the setting of stitch length approaches "0.3". Neat zigzag stitches are usually achieved at "1.0-2.5". Closed up zigzag stitches (close together) are referred to as a satin stitch. 502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN