Bernina Bernette 25 Instruction Manual - Page 66
on the foot controller to start
View all Bernina Bernette 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Special Functions 65 1st memory position Press set/disp button to memorize it. After pressing, set the memory position (01 for the first) is shown on the stitch display for 2 seconds. 2ed memory position Then stitch number continues to flash with the last programmed stitch. Repeat above-mentioned steps for more patterns to be stored in the memory. Please Note: - After Press set/disp button to memorize stitch, press the start/stop button or step on the foot controller to start test sewing the current stitch.. - When the memory is full with 30 units of patterns, the machine will beep 3-short beeps. Press the memory button to leave the memory mode and return to the normal mode. 502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Press set/disp button to memorize it.
After pressing, set the memory position (01
for the first) is shown on the stitch display for
2 seconds.
Then stitch number continues to flash with
the last programmed stitch.
Press set/disp
to
test sewing
the current stitch.
Repeat above-mentioned steps for more
patterns to be stored in the memory.
ress the start/stop button or step
on the foot controller to start
3-short
beeps
Please Note:
- After
button
memorize
stitch, p
.
- When the memory is full with 30 units of
patterns, the machine will beep
.
Press the memory button to leave the
memory mode
return to the normal mode
and
.
1st memory position
2ed memory position
Special Functions
65
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN