Bernina Bernette 25 Instruction Manual - Page 48
Zipper Insertion
View all Bernina Bernette 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Zipper Insertion I 3.5 1.5~3.0 5mm Basic Sewing Procedures 47 * The zipper foot accessory is optional. (For model 20) Attention: Zipper foot should be used for sewing width center needle position straight stitch only. It is possible that needle could hit the presser foot and break when sewing other patterns. Inserting a centered zipper - Baste the zipper opening on the garment. - Press open the seam allowance. Place the zipper face down on the seam allowance with the teeth against the seam line. Baste the zipper tape. - Attach the zipper foot. Attach the right side of the presser foot pin to the holder when sewing the left side of the zipper. - Attach the left side of the presser foot pin to the presser foot holder when sewing the right side of the zipper. - Stitch left side of the zipper from top to bottom. - Stitch across the lower end and right side of zipper. Remove the basting and press. 502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN