Bernina Bernette 25 Instruction Manual - Page 40
Blind Hem - test
View all Bernina Bernette 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Blind Hem Basic Sewing Procedures 39 2.5~4.0 1.0~2.0 16mm 8mm 8mm Reverse Overcasting Reverse side stitch side a b 07: Blind hem/lingerie for firm fabrics 16: Blind hem for stretch fabrics Fold the fabric as illustrated with the reverse side uppermost. First carry out an overcasting stitch as shown in left picture. Please Note: It takes practice to sew blind hem. Always make a sewing test first. Place the fabric under the foot. Turn the handwheel forwards by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the stitch width accordingly. Adjust the guide (b) by turning the knob (a) so that the guide just rests against the fold. Sew slowly, guiding the fabric carefully along the edge of the guide. Turn over the fabric. 502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN