Binatone iDECT Eclipse Plus User Manual - Page 10
Installing Your Phone
View all Binatone iDECT Eclipse Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 INSTALLING YOUR PHONE To the 2.1 Connecting the Base Station telephone 1) Plug the mains power cable and telephone line socket To the mains power socket line cord into the base station. 2) Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket, and the telephone line cord into a telephone line socket. Warning: Always use the cables provided in the box. Use only the supplied adaptor. Using other power cables may damage the unit. Note: Place the base unit within easy reach of the mains power socket. Never try to lengthen the mains power cable. The base station needs mains power for normal operation, and the cordless handsets will not work without it. 2.2 Installing and Charging the Rechargeable Batteries in the Main Eclipse Handset 1) Insert the 2 supplied batteries into the battery compartment, observing the correct polarity (see markings inside battery compartment). Warning: Use only the supplied NiMH rechargeable batteries. 2) Place the back cover over the back of the handset and press down until it clicks into place. 3) Place the handset on the base and charge for 15 hours before using the handset for the first time. • The handset will give a double beep when it is properly placed on the base and the battery charging indicator on the base lights up to indicate charging. Note: The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal and does not indicate a fault. 8