Binatone iDECT Eclipse Plus User Manual - Page 29
All the registered handsets that are in range will start to ring., When first turned on, the display
View all Binatone iDECT Eclipse Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.6 Mute/Unmute the Microphone When the microphone is muted, the handset displays MUTE ON, and your caller cannot hear you. m m During a call, press (Main Eclipse handset) or press (additional handsets) to turn on/off the microphone. 4.7 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. 1. Press the key under the base unit. • All the registered handsets that are in range will start to ring. You can stop the paging by pressing any key on a handset or the key under the base unit again. 4.8 Switching the Handset On/Off O O Press and hold on your main Eclipse Handset or press on the additional handsets for more than 2 seconds to switch the handset on or off in standby mode. • When first turned on, the display shows SEARCHING... until the handset finds the base. Note: You can switch the handset off to save battery life, if the handset is not on the base or a charging pod and you do not want to use it for a while. IMPORTANT: When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring when there is an incoming call. To answer a call, you will need to switch it back on and it may take some time for the handset to re-establish a radio link with the base unit. 27