Binatone iDECT Eclipse Plus User Manual - Page 70
on A confirmation tone is played.
View all Binatone iDECT Eclipse Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Note: If the answering machine is OFF and the Master PIN is still set at its default 0000, the answering machine will not answer any incoming calls. However, if the Master PIN has been changed and Remote Access is activated, it will answer incoming calls after 14 rings to allow remote access, and the ANSWER ONLY announcement will play. (See Remote Access on page 78.) 11.2 Answer Mode The phone comes with two pre-recorded announcements for the respective answer modes: ANSWER ONLY and RECORD MSGS on the Main Eclipse Handset or ANSWER ONLY and ANSW.&RECORD on the additional handsets. By default, the answer mode is RECORD MSGS on the Main Eclipse Handset or ANSW.&RECORD on the additional handsets, which allows a caller to leave a message on the answering machine after hearing the announcement. This can be changed to ANSWER ONLY mode, which does not allow callers to leave any messages on the answering machine after hearing the announcement. 11.2.1 Set Answer Mode - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to select ANS. SYSTEM. + - M 3. Press / to ANSWER MODE and then press to select. + - 4. Press / to select ANSWER ONLY or RECORD MSGS and M then press to confirm. • A confirmation tone is played. O 5. Press to return to standby mode. - On Your Additional Handset M 1. From the home screen, press . M 2. Press +\- to ANSW MACHINE and then press to select. M 3. Press +\- to ANSWER MODE and then press to select. 4. Press +\- to select ANSWER ONLY or ANSW.&RECORD M and then press to confirm. • A confirmation tone is played. O 5. Press to return to standby mode. 68