Binatone iDECT Eclipse Plus User Manual - Page 80

11.7 Remote Access The phone lets you listen to the messages on your answering machine, or otherwise operate your answering machine by calling in to your answering machine from another touch-tone phone. You need to enter a remote access code (same as your Master PIN) to access your answering machine remotely. The remote access code is used to prevent unauthorised access of your answering machine. Remote Access must be enabled if you want to use this feature. (See Activate/Deactivate Remote Access on page 70.) 11.7.1Access the Answering Machine Remotely 1. Dial your phone number from any touch-tone phone. 2. When your answering machine answers your call and starts playing your announcement, press the < # > key. • The announcement will stop playing. 3. Enter your Remote Access Code (same as your Master PIN code) within 8 seconds using the numeric keypad on the touch-tone phone. Note that the answering machine will drop the call if you do not enter the Master PIN within 8 seconds. 4. If the code is accepted, you will hear a confirmation tone. 5. The answering machine will start to playback all the messages on your answering machine, beginning with new messages, or if there are no recorded messages you will hear four beeps. 6. Use the keypad on the touch-tone phone to carry out the following operations: Keys 1 Repeat the previous message. 2 Playback messages / Repeat the current message. 3 Skip to the next message. 6 Delete the current message. 7 Turn on the answering machine in RECORD MSGS mode (main Eclipse handset) or ANSW.&RECORD mode (additional handsets). 8 Stop message playback. 9 Turn off the answering machine. 78