Biostar M7TDB M7TDB user's manual - Page 71
Installation of Driver - drivers
View all Biostar M7TDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 3 RAID Setting Guide 3.2 Installation of Driver 3.2.1 Introduction After the computer start up, you shall install RAID driver . 3.2.2 Windows 98/ME Automatic Installation After the computer start-up, Windows system will find the newly installed RAID adapter and ask you to install its driver. Please follow the prompt to finish the driver installation. Manual Installation If Windows can not find new hardware, the driver can be installed through the following steps : 1. Shut down all programs. 2. Click Start-->Setup-->Control Panel, then double-click on Add New Hardware icon. 3. Click Next in the popup window to continue.". 4. A dialog box will appear and ask whether to let windows search new hardware. Select No,I want to select the hardware form a list. Then click Next to continue. 5. Hardwares of different types will be shown in the follow-on window. Select SCSI Controllers and then click Next to continue. 6. Insert the floppy disk of driver into the floppy drive, then click Have Disk.... 7. A dialog box will pop up, input the path of driver A:\Win9X.Then click OK to continue. 8. In the follow-on window, select HPT370 UDMA/ATA100 RAID Con-troller then click Next to continue. 9. Follow the system prompt to install driver. When finished, restart the computer. 3-2