Biostar M7TDB M7TDB user's manual - Page 73
Windows NT4.0, Install driver under Windows NT4.0, Install driver in the process of Windows NT4.
View all Biostar M7TDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 3 RAID Setting Guide 3.2.3 Windows NT4.0 Install driver under Windows NT4.0 1. Click Start-->Setup-->Control Panel, then double-click SCSI Adapter icon. 2. In the follow-on window, select Driver item. then click Add button. 3. In the follow-on window, select Have Disk.... 4. Insert the floppy disk of driver, input the path of driver A:\WinNT, then click OK. 5. In the follow-on window, select HPT370 UDMA/ATA100 RAID Con-troller item, then click OK. 6. Follow the system prompt to install the driver. When finished, re-start the computer. Install driver in the process of Windows NT4.0 installation 1. Press F6 key when the system prompts Setup is inspecting your computer's hardware configuration. 2. Press F6 key, the installation will continue. Later, installation pro gram will remind user to press S key to specify other devices. Please press S key. 3. In the follow-on Device Type window, select Other item, then press Enter to confirm. 4. The installation program will prompt users to insert the floppy disk of driver. Please insert it and then press Enter to confirm. 5. In the follow-on window, select HPT370 UDMA/ATA100 RAID Controller, then press Enter to confirm. 6. The follow-on interface will list the devices to be installed, in which HPT370 UDMA/ATA100 RAID Controller item should be included.( If users want to install other devices, please operate at this time. If all devices have been successfully installed, please go to next.) 7. Press Enter to continue the installation of Windows NT4.0. 3-4