Biostar M7TDB M7TDB user's manual - Page 76
When the driver has been successfully installed and the computer restarted
View all Biostar M7TDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 3 RAID Setting Guide restarted, press F6 key when the message Setup is inspecting your computer's hardware configuration appears. 2. Press S key to specify additional devices when the Windows 2000 Setup window appears. 3. In the follow-on window of device type, please select Other and press Enter to continue. 4. Insert the floppy disk of driver, then press Enter to continue. 5. The system will ask whether to install driver under WinNT or under Windows 2000, please select to install driver under Windows 2000. 6. The follow-on interface will list the devices to be installed, in which HPT370 UDMA/ATA100 RAID Controller item should be included.( If users want to install other devices, please operate at this time. If all devices have been successfully installed, please go to next.) 7. Press Enter to continue Windows 2000 setup. Verify Installation When the driver has been successfully installed and the computer restarted: 1. Right-click My Computer icon, select Property item in the popup menu. 2. In the popup window, select Hardware item and then click Device Manager button. If there is HPT370 UDMA/ATA100 RAID Controller item in the popup Device Manager window, it indicates that the driver has been successfully installed. Otherwise, please reinstall the driver. 3-7