Biostar M7VIP M7VIP user's manual - Page 50
Using FastBuild™ Configuration Utility
View all Biostar M7VIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
MMootthheerrbbooaarrdd DDeessccrriippttiioonn Using FastBuild™ Configuration Utility The FastBuild™ Configuration Utility offers several menu choices to create and manage the drive array on the Promise FastTrak 376. For purposes of this manual, it is assumed you have already created an array in the previous chapter and now wish to make a change to the array or view other options. Navigating the FastBuild™ Setup Menu Viewing FastTrak 376 BIOS Screen When you boot your system with the FastTrak 376 and drives installed, the Promise onboard BIOS will detect the drives attached and show the following screen. FastTrak 376 (tm) BIOS Version 2.00.0.XX (c) 2002-2005 Promise Technology, Inc. All Rights Reserved. Scanning IDE drives . . . . . If an array exists already, the BIOS will display the following screen showing the BIOS version and status of the array. FastTrak 376 (tm) BIOS Version 2.00.0.xx (c) 2002-2005 Promise Technology, Inc. All Rights Reserved. ID MODE SIZE TRACK-MAPPING STATUS 1 * 2+0 Stripe 16126M 611/128/32 Functional Press to enter FastBuild (tm) Utility.... The array status consists of three possible conditions: Functional, Critical, Offline. Functional - The array is operational. Critical - A mirrored array contains a drive that has failed or disconnected. The remaining drive member in the array is functional. However, the array has 48