Biostar TF560 A2 Setup Manual - Page 95
Shutdown Temperature, Show H/W Monitor in POST
View all Biostar TF560 A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
TF520 A2+/TF560 A2+ SYS FAN1 Control By The Choice "smart" can make your northbridge FAN to reduce noise. The Choices: Always ON (default), Smart. CPU FAN Control By The Choice "smart" can make your CPU FAN to reduce noise. The Choices: Always ON (default), Smart. CPU Fan Off If the CPU Temperature is lower than the set value, FAN will turn off. The Choices: Min=0,.Max=20, Key in a DEC number. CPU Fan Start CPU fan starts to work under smart fan function when arrive this set value. The Choices: Min=0,.Max=50, Key in a DEC number. CPU Fan Full speed When CPU temperature is reach the set value, the CPU fan will work under Full Speed. The Choices: Min=0,.Max=80, Key in a DEC number. Start PWM Value When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1. The Choices: Min=0,.Max=127, Key in a DEC number. Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. This item is only effective under Windows 98 ACPI mode. The Choices: Disabled, 60℃/ 140℉, 65℃/ 149℉, 70℃/ 158℉, 75℃/ 167℉, 80℃/ 176℉(Default), 85℃/ 185℉, 90℃/ 194℉. Show H/W Monitor in POST If you computer contains a monitoring system, it will show PC health status during POST stage. The item offers several different delay times. The Choices: Enabled (default), Disabled. 33