Biostar VIOTECH 3200 Setup Manual - Page 3
Introduction - + drivers
View all Biostar VIOTECH 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
CHAPTER 1: INTRODUCTION Viotech 3200+ 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water. Do not squeeze or touch CPU Cooler (Fan/Heatsink) The operating temperatures of the computer should be 0 to 45 degrees Celsius. 1.2 PACKAGE CHECKLIST Rear I/O Panel Shield X 1 Fully Setup Driver CD X 1 (full version manual files inside) Serial ATA Cable X 2 Quick Installation Guide X 1 1