Bissell CleanView Helix Plus Vacuum User Guide - English - Page 6

Caution

Page 6 highlights

Operations Handle position Press the handle release pedal with your foot to place your CleanView Helix into one of three cleaning positions. 1. Upright- For storage and above floor cleaning with tools. 2. Normal cleaning - Press handle release household floor cleaning tasks. 3. Low cleaning -With the vacuum in normal cleaning position, press handle release pedal again, use for reaching under low furniture such as tables, chairs or beds. Height adjustment There are five height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - For low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting. Medium setting - For medium pile carpet. Highest setting - For high pile and most shag carpet. Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off the foot while turning. Power switch The power switch is located just below the handle on the side of the vacuum. I - ON O - OFF Transporting cleaner 1. To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the carrying handle. 6 w w w. b i s s e l l . c o m CAUTION: Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular, pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. Tip: Hair, string and small objects can block the vacuum hose or tools. Check them occasionally for obstructions. Tip: Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose. Tip: Your vacuum features a Quick Release cord wrap. To remove the power cord quickly and easily, rotate the upper cord wrap towards floor, and slip power cord from upper and lower cord wraps. 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

www.bissell.com
800.237.7691
O
perations
6
Handle position
Press the handle release pedal with your
foot to place your CleanView Helix into
one of three cleaning positions.
1. Upright
For storage and above floor
cleaning with tools.
2.
Normal cleaning
Press handle release
household floor cleaning tasks.
3. Low cleaning
With the vacuum in
normal cleaning position, press handle
release pedal again, use for reaching under
low furniture such as tables, chairs or beds.
Height adjustment
There are five height settings available
for various floor surfaces. Turn the dial
on the foot of the cleaner to the desired
setting.
Lowest setting
For low pile carpet or bare
floors. To pick up debris it may be
necessary
to move up one setting.
Medium setting
– For medium pile carpet.
Highest setting
– For high pile and most
shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting.
If your cleaner is
difficult to push, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off the foot
while turning.
Power switch
The power switch is located just below
the handle on the
side of the vacuum.
I - ON
O - OFF
Transporting cleaner
1.
To move your cleaner from room to room,
put the Handle in the upright position, tilt
the cleaner back on its rear wheels and
push forward.
2.
The cleaner can also be moved by using
the carrying handle.
CAUTION:
Before using your vacuum,
make sure that the dirt
container is in locked position
and that all filters (inner
circular, outer circular,
pre-motor and post-motor) are
in place. Do not operate your
vacuum without these filters.
Tip:
Your vacuum features a Quick Release cord
wrap. To remove the power cord quickly
and easily, rotate the upper cord wrap
towards floor, and slip power cord from
upper and lower cord wraps.
Tip:
Before cleaning
under low furniture,
check area first for
objects that might
harm the unit or block
the vacuum hose
.
Tip:
Hair, string and
small objects can
block the vacuum
hose or tools. Check
them occasionally
for obstructions.