Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 User Guide - Page 12
Cleaning the Brush Roll and Chamber
View all Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Cleaning the Brush Roll and Chamber WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 Grasp Brush 2 Pull Brush Roll Roll Window out by grabbing on the front the Brush Roll of its face and tab and pulling pull upward to upward. remove. 3 4 5 With warm water, rinse your Brush Roll Window and Brush Roll. If your Brush Roll chamber is dirty, clean with a rag or towel. Let your Brush Roll and Brush Roll Window chamber dry before reassembling. TIP: Running your machine with a wet Brush Roll will help the Brush Roll dry faster. The trigger should not be pressed. NOTE: The Brush Roll is not dishwasher or automatic washing machine safe. Please follow cleaning instructions above. 6 7 Replace Brush Roll by inserting the Brush Roll end into the right side of the Foot. Then lock the pull tab into place by pressing downward. Replace the Brush Roll Window by first lining up both window tabs with the edges of the foot. Then press the window back into place until you hear a "click". 12 www.BISSELL.com