Bissell ProHeat Advanced Upright Carpet Cleaner 1846 User Guide - English/Span - Page 11
Operations: Hard Floor Cleaning
View all Bissell ProHeat Advanced Upright Carpet Cleaner 1846 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Operations: Hard Floor Cleaning This deep cleaner is also designed to clean hard floors when using the Bare Floor Tool from BISSELL. A Bare Floor Tool and Hard Floor Solutions formula is available for purchase from BISSELL.com or BISSELL Consumer Services. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. NOTE: Prior to filling with formula, be sure any carpet cleaning formula that may have been previously used is thoroughly rinsed from the 2-in-1 tank. Thoroughly vacuum or sweep floor to pick up any debris before using your deep cleaner. 1 2 3 Fill BISSELL 2X Hard Floor Solutions formula to the indicated fill line in the built-in measuring cup of the tank lid. Once measured, pour into the bladder. Fill with clean hot tap water (140°F/60°C MAX). Do not boil or heat the tank in the microwave. Return the lid to the tank and return the tank to the machine. 4 Make sure the machine is off and unplugged from the grounded outlet. Attach the bare floor tool to the bottom of the machine: hook the tool into the nozzle and swing it down until it clicks into place. 5 Be sure the ReadyTools dial is set to Floor Cleaning. 6 Plug the Power Cord into a grounded outlet and press the Power Switch Pedal. 7 While pressing the spray trigger make one slow wet pass forward and back. Repeat the motion with the trigger released, using the tool to squeegee and suction up the dirty water. When finished, remove the tool and let it dry before storing. Refer to the Maintenance section on page 13 for machine clean up and storage tips. www.BISSELL.com 11