Bissell ProHeat Advanced Upright Carpet Cleaner 1846 User Guide - English/Span - Page 6

Page 6 highlights

Assembly WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. Your deep cleaner comes in four easy-to-assemble components and an accessory bag. - Upper Handle - Base - Upper Hose Wrap - Lower Hose Wrap The only tool you will need to assemble your deep cleaner is a Phillips screwdriver. 1 2 2 1 Slide handle assembly onto lower body and secure with two long screws. 3 Attach upper hose rack to back of upper handle by pushing into open slots and sliding down until it snaps into place. 4 3 1 2 Attach lower hose rack by sliding it in place on the lower body assembly and securing it with 2 short screws. Attach Tough Stain tool to end of hose. 6 www.BISSELL.com Wrap flex hose around hose rack and secure it into notched out holder as shown.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Slide handle assembly onto lower body
and secure with two long screws.
Attach upper hose rack to back of upper
handle by pushing into open slots and
sliding down until it snaps into place.
www.BISSELL.com
6
Assembly
The only tool you will need to assemble
your deep cleaner is a Phillips screwdriver.
3
4
1
Attach lower hose rack by sliding it in place on the lower
body assembly and securing it with 2 short screws.
Attach Tough Stain tool to end of hose.
Wrap flex hose around
hose rack and secure
it into notched out
holder as shown.
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
1
2
1
2
Your deep cleaner comes in four
easy-to-assemble components and
an accessory bag.
- Upper Handle
- Base
- Upper Hose Wrap
- Lower Hose Wrap
3
2