Bissell ProHeat Advanced Upright Carpet Cleaner 1846 User Guide - English/Span - Page 9
Operations: Carpet Cleaning
View all Bissell ProHeat Advanced Upright Carpet Cleaner 1846 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operations: Carpet Cleaning TIP: Thorough vacuuming before deep cleaning will prevent early clogging in the nozzle and lint trap. 1 2 3 Plug the power cord into a properly grounded outlet. 4 Set the ReadyTools Dial to "FLOOR CLEANING". Turn the power on by pressing the red Power Switch on the back of the machine with your foot. NOTE: Do not overwet the carpet. Also take care not to run over loose objects, edges of area rugs, or the power cord. Recline the machine by pressing the gray release switch with your foot. NOTE: Stalling the brush by running over loose objects, edges of area rugs, or the power cord may cause the belts to snap and break. 5 While pressing the trigger, make one slow pass forward and back to put water and formula down. Release the trigger and make one slow pass forward and back over the same area to pick up the water and formula that was just put down. Repeat until the liquid coming up appears clean. Continue passes without pressing the trigger until you can't see any more water being suctioned up. ATTENTION: To prevent damage to Berber carpets, avoid repeated strokes in the same area. NOTE: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that may have never been deep cleaned before). This debris should be picked up and thrown away. www.BISSELL.com 9