Bissell ProHeat Pet Turbo Carpet Cleaner 1799V User Guide - Page 4

Assembly The only tool you will need to assemble your deep cleaner is a Phillips-head screwdriver. 1. First, slide the Upper Handle onto the base. 2. From the flat side of the Hose & Tool Holder, feed the power cord through the rounded-rectangle opening. 3. Align the Hose & Tool Holder with the Upper Handle holes. 4. Place Hex Nut into back of Hose & Tool Holder and hold in place. Insert bolt from the front to the back, turning the bolt into the Hex Nut until snug. Do not overtighten. Repeat for the second bolt and Hex Nut. 5. Insert 2 screws into lower 2 holes located just above the lower hose rack. Turn the screws until tightened. 6. Attach tools to the end of the hose and front of the Upper Handle. Wrap the power cord and hose. Before You Clean Maximum Results with your ProHeat® Pet Deep Cleaner • Move furniture to another area if cleaning an entire room (optional). • Thoroughly vacuum area with a dry vacuum cleaner before deep cleaning. • Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. • Pretreating your carpet is recommended to improve cleaning effectiveness for spots and stains and heavily soiled carpets. 1. Spray a BISSELL® Stain Pretreat formula onto high-traffic areas, soiled areas or stains. 2. Allow to penetrate for at least 3 minutes. 3. Deep clean carpet with machine set to Heavy Traffic cleaning mode.. • Opening windows or running a fan increases air flow in a room and expedites dry time. WARNING Do not plug in your machine until you are familiar with all instructions and operating procedures. 4 BISSELL.com