Bissell ProHeat Pet Turbo Carpet Cleaner 1799V User Guide - Page 8

Cleaning with the Hose & Attachments 1. Set the ReadyTools™ Dial to the Tools setting. This will allow the machine to divert the spray and suction to the hose. 2. Set the SmartMix® Dial to the Normal setting. 3. Attach the cleaning tool to the end of the hose. 4. Plug the power cord into a properly grounded outlet. Press the Power Switch to turn the machine ON. 5. Press the trigger to spray solution on the area you are cleaning. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction up the soiled area. Work in small sections. When finished, rinse the hose and tool by suctioning warm water from a bowl. Allow the hose and tool to dry and re-wrap the hose & tool on the machine before storing. ATTENTION • Check upholstery tags for any special care instructions. If possible, check for colored stuffing as it is possible the color could bleed through. Check for colorfastness in a hidden area, like the back or underside of the furniture. • Do not overwet carpet. WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure and level. 8 BISSELL.com