Bissell ProHeat Pet Turbo Carpet Cleaner 1799V User Guide - Page 6

Cleaning Your Floors 1. Set the ReadyTools™ Dial to Floor Cleaning. 2. Choose a SmartMix® Setting. Each setting is designed to adjust proper amounts of water and cleaning formula for your carpet. Heavy Traffic: For your dirtiest carpeted areas. Normal: For lightly soiled carpet. Water Rinse: Will not put cleaning formula on carpet. 3. Plug the power cord into a properly grounded outlet. Press the Power Switch to turn the machine ON. 4. While pressing the trigger, make one slow pass forward and back to put water and formula down. 5. Release the trigger and make one slow pass forward and back over the same area to pick up the water and formula that was just put down. Repeat cleaning passes until the liquid coming up appears clean. Continue passes without pressing the trigger until you can't see any more water being pulled up. ATTENTION • To prevent damage to Berber carpets, avoid repeated strokes in the same area. • Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure and level. 6 BISSELL.com