Bissell ProHeat Pet Turbo Carpet Cleaner 1799V User Guide - Page 9

Emptying the 2-in-1 Tank, After-Cleaning Care

Get Bissell ProHeat Pet Turbo Carpet Cleaner 1799V PDF manuals and user guides View all Bissell ProHeat Pet Turbo Carpet Cleaner 1799V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Emptying the 2-in-1 Tank 1. Press the Power Switch OFF. Remove the 2-in-1 Tank from the base by lifting up on the tank's carry handle. 2. Rotate the carry handle to unlatch the lid and empty the tank. After-Cleaning Care 1. Turn power OFF and unplug the machine. Always wrap the power cord and make sure the hose is securely wrapped. 2. Make sure you rinse the 2-in-1 Tank an extra time on the last rinse. Rinse under and around the bladder. 3. Remove and rinse the red lint screen. 4. Clean the flow indicator filter after each use. Unscrew the cap to lift the red rotor and white filter. Rinse all parts with water and return them to the machine. Twist the cap back on, but do not overtighten. 5. Insert the Nozzle Clean Out Tool into the thin slot on the end of the Floor Nozzle. Clean until free of pet hair or debris. Use the opposite side of the tool to clean the Brush Rolls by combing the bristles to help loosen hair or debris. 6. Wipe the machine's exterior with a soft cloth. Once your carpet is dry, vacuum again to remove any excess hair or fuzz on your carpet. WARNING To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. BISSELL.com 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
BISSELL.com
9
Emptying the 2-in-1 Tank
1.
Press the Power Switch OFF.
Remove the 2-in-1 Tank from the
base by lifting up on the tank’s
carry handle.
2.
Rotate the carry handle to
unlatch the lid and empty the
tank.
After-Cleaning Care
1.
Turn power OFF and unplug
the machine. Always wrap the
power cord and make sure the
hose is securely wrapped.
2.
Make sure you rinse the
2-in-1 Tank an extra time on
the last rinse. Rinse under and
around the bladder.
3.
Remove and rinse the red
lint screen.
4.
Clean the flow indicator
filter after each use. Unscrew
the cap to lift the red rotor and
white filter. Rinse all parts with
water and return them to the
machine. Twist the cap back
on, but do not overtighten.
5.
Insert the Nozzle Clean Out
Tool into the thin slot on the
end of the Floor Nozzle. Clean
until free of pet hair or debris.
Use the opposite side of the
tool to clean the Brush Rolls
by combing the bristles to help
loosen hair or debris.
6.
Wipe the machine’s exterior
with a soft cloth. Once your
carpet is dry, vacuum again to
remove any excess hair or fuzz
on your carpet.
WARNING
To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.