Bissell Rewind CleanView Pet User Guide - Page 12
Replace headlight, TurboBrush Tool maintenance - belt
View all Bissell Rewind CleanView Pet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Maintenance and care Replace headlight 2. 1. Turn power OFF. Unplug vacuum from electrical outlet. 2. Using a flat screwdriver or coin, insert into the slot on the right of the lens and gently push inner latch to the left to remove the lens. 3. Pull old bulb straight out of socket. Push new bulb straight into socket until locked into place. 4. Reposition lens by inserting the tab on the left side and then pushing the right side back into place. 2. TurboBrush Tool maintenance Select models include Pet TurboEraser Tool that follows same maintenance instructions. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. Turn tool so bottom side faces up and remove the two screws. 3. Remove the faceplate and clear any obstructions 4. Remove the brush from the drive belt to clean debris. 5. Reposition the drive belt on the brush, and place ends of brush in slots on the side. Reposition faceplate and secure with two screws. 3. 4. 12 www.bissell.com 800.237.7691