Bissell Rewind CleanView Pet User Guide - Page 13

Please do not return this product to the store. - manual

Page 13 highlights

Troubleshooting Vacuum cleaner won't turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker 3. Damaged cord 3. Refer to a BISSELL authorized service center for repair or replacement Vacuum cleaner won't pick up Possible causes Remedies 1. Clog in hose or elsewhere in vacuum 1. Follow instructions on page 11 for clearing clogs 2. Filters are dirty 2. Check and clean pre-motor and post-motor filters, see pages 8 & 9 3. Dirt container is full 3. Empty dirt container 4. Hose not attached properly 4. Grasp quick reach handle and firmly push hose wand onto the hose wand base 5. Dirt container or upper tank not installed properly 5. Position correctly and lock in place 6. Incorrect height adjustment 6. Adjust powerfoot to correct height setting 7. Crack or hole in hose 7. Check hose and replace if needed 8. Broken or worn belt drive 8. Replace drive bet, see page 10 9. Rotating floor brush jammed 9. Remove brush and clean debris from brush ends 10. Rotating floor brush bristles worn 10. Replace brush Tools won't pick up Possible causes Remedies 1. Clog in hose or elsewhere in vacuum 1. Follow instructions on page 11 for clearing clogs 2. Filters are dirty 2. Check and clean pre-motor and post-motor filters, see pages 8 & 9 3. Dirt container is full 3. Empty dirt container 4. Dirt container or upper tank not installed properly 4. Position correctly and lock in place 5. Crack or hole in hose 5. Check hose and replace if needed Visible dirt escaping from cleaner Possible causes Remedies 1. Dirt container full 1. Empty dirt container 2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor filters for correct installation Cord will not retract Possible causes Remedies 1. Knotted or twisted 1. Follow instructions on page 6 Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 13 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

www.bissell.com
800.237.7691
13
T
roubleshooting
Vacuum cleaner won't turn on
Possible causes
Remedies
1.
Power cord not plugged in
1.
Check electrical plug
2.
Blown fuse/tripped breaker
2.
Check/replace fuse or reset breaker
3.
Damaged cord
3.
Refer to a BISSELL authorized service center for repair or
replacement
Vacuum cleaner won't pick up
Possible causes
Remedies
1.
Clog in hose or elsewhere in vacuum
1.
Follow instructions on page 11 for clearing clogs
2.
Filters are dirty
2.
Check and clean pre-motor and post-motor filters,
see pages 8 & 9
3.
Dirt container is full
3. Empty dirt container
4.
Hose not attached properly
4.
Grasp quick reach handle and firmly push hose wand onto
the hose wand base
5.
Dirt container or upper tank not installed properly
5.
Position correctly and lock in place
6.
Incorrect height adjustment
6.
Adjust powerfoot to correct height setting
7.
Crack or hole in hose
7.
Check hose and replace if needed
8.
Broken or worn belt drive
8.
Replace drive bet, see page 10
9.
Rotating floor brush jammed
9.
Remove brush and clean debris from brush ends
10.
Rotating floor brush bristles worn
10. Replace brush
Tools won't pick up
Possible causes
Remedies
1.
Clog in hose or elsewhere in vacuum
1.
Follow instructions on page 11 for clearing clogs
2.
Filters are dirty
2.
Check and clean pre-motor and post-motor filters,
see pages 8 & 9
3.
Dirt container is full
3.
Empty dirt container
4.
Dirt container or upper tank not installed properly
4.
Position correctly and lock in place
5.
Crack or hole in hose
5.
Check hose and replace if needed
Visible dirt escaping from cleaner
Possible causes
Remedies
1.
Dirt container full
1.
Empty dirt container
2.
Filters missing or installed incorrectly
2.
Check pre-motor and post-motor filters for correct installation
Cord will not retract
Possible causes
Remedies
1.
Knotted or twisted
1.
Follow instructions on page 6
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.