Bissell Rewind CleanView Pet User Guide - Page 7

Operations Clean carpet sensor (select models only) Clean carpet sensor detects dirt and debris being picked up while vacuum is in use. Clean Carpet Sensor Red Light: Vacuum picking up dirt. Alternate to Green and Red: Slightly soiled area. Green Light: Vacuum detects clean area. Clean filter indicator (select models only) The indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The indicator will remain green until the air flow is reduced - and then will change to red. When fully red, the airflow is greatly reduced or clogged by a dirty filter; follow instructions on pages 8 & 9 to clean/replace your filters. Tools Attach desired tool to hose for above floor cleaning surfaces or hard to reach areas. 1. Remove Hose: with vacuum in upright position, grasp the Quick Reach Handle to separate hose from hose base. 2. Attach tools by firmly pushing onto vacuum hose or extension wand. A. Combination dusting brush/ upholstery tool: Rotate for desired use. Use brush side to dust, or for blinds, books, lamps, shelves, and baseboards. Use upholstery side to for furniture, drapes, and fabrics. B. Crevice Tool: Use in tight, narrow spaces. C. Extension Wand: Use with desired attachment for longer reach. D. TurboBrush Tool: Use rotation brush action for small flat areas such as stairs and cushions. Press gently down and pull towards you in raking motion; too much pressure will cause brush to stop rotating. Select models include Pet TurboEraser™ Tool - follow same instructions for operation and maintenance. Clean Filter Indicator NOTICE: The floor brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward. www.bissell.com 7 800.237.7691