Bissell Total Floors Pet User Guide - Page 12
Clearing Clogs - belt
View all Bissell Total Floors Pet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Maintenance and Care Clearing Clogs 1. Turn the power switch off and unplug the vacuum from the electrical outlet. 2. Check the upper tank for build up or clogs. 3. If you notice dirt build up in the inner cyclone, follow instruction on how to clean the inner cyclone in page 10. 4. Check for a clog in the foot hose & edge cleaning port, the wand or in the hose. NOTE: When the indicator reads Red, there is a clog in the hose which is diminishing suction power. Remove the clog in the hose to restore full suction power. 5. Remove the Twist 'n Snap hose from the vacuum by turning to the right. Straighten the hose and unclog with a long, narrow object. 6. If you notice debris or dirt clogged in the foot hose, remove it by pulling it out. 7. If the clog persists, follow the instructions for checking the rotating floor brush and drive belt on page 14 and inspect the air passageway for obstructions. foot hose 12 w w w. b i s s e l l . c o m 800.237.7691