Bissell Total Floors Pet User Guide - Page 16

Thank you for selecting a BISSELL product., Please do not return this product to the store. - manual

Get Bissell Total Floors Pet PDF manuals and user guides View all Bissell Total Floors Pet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Troubleshooting - Total Floors® Vacuum cleaner won't turn on Possible causes 1. Power cord not plugged in 2. Blown fuse/tripped breaker Remedies 1. Check electrical plug 2. Check/replace fuse or reset breaker Vacuum cleaner won't pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting 2. Hose not attached to suction opening 2. Grasp quick reach handle and firmly push hose wand onto the suction opening 3. Crack or hole in hose 3. Check hose and replace if needed 4. Broken or worn drive belt 4. Replace drive belt, see page 15 5. Rotating floor brush bristles worn 5. Replace brush 6. Rotating floor brush jammed 6. Remove brush and clean debris from brush ends 7. Clog in vacuum- hose/ foot/ body 7. Follow instructions on page 12 for clearing clogs 8. Dirt container full 8. Empty dirt container 9. Dirt container or upper tank not installed properly 9. Position correctly and lock in place 10. Filters are dirty 10. Check and clean pre-motor and post-motor filters Tools won't pick up dirt Possible causes Remedies 1. Crack or hole in hose 1. Check hose and replace if needed 2. Clog in vacuum 2. Follow instructions on page 12 for clearing clogs 3. Dirt container full 3. Empty dirt container 4. Dirt container or upper tank not installed properly 4. Position correctly and lock in place 5. Filters are dirty 5. Check and clean pre-motor and post-motor filters Vacuum cleaner is difficult to push Possible causes Remedies 1. Incorrect height adjustment Visible dirt escaping from cleaner Possible causes 1. Adjust powerfoot to correct height setting Remedies 1. Dirt container full 1. Empty dirt container 2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor filters for correct installation Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. 16 w w w. b i s s e l l . c o m 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
www.bissell.com
800.237.7691
16
Vacuum cleaner won’t turn on
Possible causes
Remedies
1.
Power cord not plugged in
1.
Check electrical plug
2.
Blown fuse/tripped breaker
2.
Check/replace fuse or reset breaker
Vacuum cleaner won’t pick up dirt
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height setting
2.
Hose not attached to suction opening
2.
Grasp quick reach handle and firmly push
hose wand onto the suction opening
3.
Crack or hole in hose
3.
Check hose and replace if needed
4.
Broken or worn drive belt
4.
Replace drive belt, see page 15
5.
Rotating floor brush bristles worn
5.
Replace brush
6.
Rotating floor brush jammed
6.
Remove brush and clean debris from brush ends
7.
Clog in vacuum- hose/ foot/ body
7.
Follow instructions on page 12 for clearing clogs
8.
Dirt container full
8.
Empty dirt container
9.
Dirt container or upper tank not installed properly
9.
Position correctly and lock in place
10.
Filters are dirty
10. Check and clean pre-motor and
post-motor filters
Tools won't pick up dirt
Possible causes
Remedies
1.
Crack or hole in hose
1.
Check hose and replace if needed
2.
Clog in vacuum
2.
Follow instructions on page 12 for clearing clogs
3.
Dirt container full
3.
Empty dirt container
4.
Dirt container or upper tank not installed properly
4.
Position correctly and lock in place
5.
Filters are dirty
5.
Check and clean pre-motor and
post-motor filters
Vacuum cleaner is difficult to push
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height setting
Visible dirt escaping from cleaner
Possible causes
Remedies
1.
Dirt container full
1.
Empty dirt container
2.
Filters missing or installed incorrectly
2.
Check pre-motor and post-motor
filters for correct installation
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
T
roubleshooting - Total Floors
®