Bissell Vacuums User Guide - Page 10

Clean/Replace Pre-Motor Filters WARNING To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the Dirt Tank. 1 2 Press the Dirt Tank Release Button and pull away from vacuum. 3 Twist tank cover to the unlock position then pull up on Handle. 4 24h Remove Pre-Motor Filter from top of Dirt Tank lid by pulling out. Both Pre-Motor Felt and Foam Filters are washable. Clean with mild detergent, rinse and squeeze all excess water. Allow filters to dry completely before reinserting. Return Pre-Motor Filters to the top of the Dirt Tank, placing the thick Foam Filter in last. NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com for filter replacements. NOTE: Washing may decrease the Febreze odor eliminating scent. Certain trademarks used under license from The Procter & Gamble Company or its affiliates. 10 www.BISSELL.com