Bissell Vacuums User Guide - Page 12
Clean Inner Cyclone Separator, Maintain Pet TurboEraser® Tool
View all Bissell Vacuums manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Clean Inner Cyclone Separator 1 2 3 Hold the Dirt Tank over a trash container. Press the bottom release button to empty. Twist Cyclone counterclockwise and pull down to remove from tank. Tap separator against inside of trash container and rinse under warm water, if necessary. Be sure to let it dry completely before placing back in Dirt Tank. Maintain Pet TurboEraser® Tool 1 Paddle Wheel 2 Twist gray collar counter-clockwise, until slot appears, and then separate faceplate. Belt Roller Remove Brush Roll, Belt, and Paddle Wheel. Inspect for damages and replace if necessary. 3 4 To reassemble, align two clips on each end of Paddle Wheel with Belt on and pop back into place. Place Brush Roll with Belt back in. Faceplate will not close properly if all parts are not aligned correctly. To put faceplate back on, align the tabs in the top of the cover and place it down to "click" into place. 12 www.BISSELL.com