Bissell Vacuums User Guide - Page 13

Replace Brush and Belt 1 2 3 Unplug and turn vacuum over. Unscrew 10 Phillipshead screws to remove bottom cover. Pull Brush Roll straight out and slide Belt off motor gear. Replace Brush Roll and/or Belt. 4 Inspect Brush Roll by placing it on its end and spinning. The Brush Roll should spin freely, multiple times by one flick. If it doesn't, replace Brush Roll. Inspect Belt, replace if it appears damaged. 1. Place Belt back on Brush Roll. 2. Pinch Belt around Brush Roll & hook back around the motor gear. 3. Rotate Brush Roll into place and line up end caps. 4. Re-attach bottom cover with 10 screws. NOTE: If an object becomes lodged in foot and brush shuts OFF, turn vacuum OFF and unplug from electrical outlet. Remove obstruction and brush will automatically reset when vacuum is plugged and turned back ON. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. www.BISSELL.com 13