Bissell Vacuums User Guide - Page 11
Clean/Replace Post-Motor Filter
View all Bissell Vacuums manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Clean/Replace Post-Motor Filter WARNING To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the Dirt Tank. 1 2 Press the Dirt Tank Release Button and pull Dirt Tank away from vacuum. Pull tab up to access Post-Motor Filter. 3 4 Twist filter counter-clockwise to unlock and remove from vacuum. When reassembling, be sure to lock the filter back into place. The pleated filter may NOT be washed. If dust/debris accumulates, gently tap the filter on the inside of a trash container. NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com for filter replacements. www.BISSELL.com 11