Black & Decker GSP401 Instruction Manual - Page 4
Save These Instructions, Warning - black decker
View all Black & Decker GSP401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
which could come in contact with the blade. • DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Gloves and substantial, non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. • DON'T OVERREACH. Keep proper footing and balance at all times. • USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or safety glasses with side shields, complying with applicable safety standards and, when needed, a face shield. Also use face or dust mask if operation is dusty. This applies to all persons in the work area. Also use a hard hat, hearing protection, gloves, safety shoes and dust collection systems when specified or required. Safety glasses or the like are available at extra cost at your local dealer or BLACK+DECKER Service Center. • MAINTAIN appliance WITH CARE. Keep cutting edges sharp and clean for best performance and to reduce the risk of injury. Follow instructions for proper maintenance. Keep handles dry, clean, and free from oil and grease. • AVOID UNINTENTIONAL STARTING. Don't carry appliance with finger on switch. • DO NOT attempt to remove cut material nor hold material to be cut when blades are moving. Make sure trimmer switch is off when clearing jammed material from blades. • CHECK DAMAGED PARTS. Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. • A guard or other part that is damaged should be properly repaired or replaced by an Authorized Service Center unless otherwise indicated elsewhere in this manual. • STAY ALERT. Watch what you are doing. Use common sense. Do not operate appliance when you are tired. • REPAIRS AND SERVICE. Repairs, maintenance and any adjustments not specified in this manual should be performed by BLACK+DECKER Authorized Service Centers or other qualified service organizations, always using identical replacement parts. • USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory or attachment not recommended for use with this appliance could be hazardous. • DON'T GRASP THE EXPOSED CUTTING BLADES or cutting edges when picking up or holding the appliance. • DO NOT OPERATE gardening appliances in gaseous or explosive atmospheres. Motors in these appliances normally spark, and the sparks might ignite fumes. • Use of a residual current device with a tripping current of 30 mA or less is recommended. SAVE THESE INSTRUCTIONS The label on your tool may include the following symbols. The symbols and their definitions are as follows: V volts A amperes Hz hertz W watts min minutes or AC.......... alternating current or DC....... direct current no no load speed Class I Construction earthing terminal (grounded) safety alert symbol Class II Construction (double insulated) .../min or rpm...revolutions or reciprocation per minute Use proper respiratory protection Read instruction manual before use Use proper eye protection Use proper hearing protection WARNING: To reduce the risk of electric shock, use only with an extension cord intended for outdoor use, such as an extension cord of cord type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A. or SJTOW-A. 4