Black & Decker LST136B Instruction Manual - Page 1
Black & Decker LST136B Manual
View all Black & Decker LST136B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
40V MAX* LITHIUM TRIMMER / EDGER INSTRUCTION MANUAL Catalog Number LST136 For use only with LB series 36v or 40v Max* batteries. KEY INFORMATION YOU SHOULD KNOW: • The guard must be installed before trimming or edging - if not, the motor will overheat. • When replacing the line, use only .065 inch diameter ROUND line (B+D Model #AF-100 is recommended) otherwise the tool will not function properly. • Do not bump the feed head against the ground - it will disrupt the feed mechanism. Thank you for choosing Black+Decker! Please read before returning this product for any reason. If you have a question or experience a problem with your Black+Decker purchase, go to http://www.blackanddecker.com/instantanswers . If you can't find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent. Please have the catalog number available when you call. Save this manual for future reference. VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. *Maximum initial battery pack voltage (measured without a workload) is 40 volts. Measured under a workload, nominal voltage is 36. To register your new product, visit www.BlackandDecker.com/NewOwner 1