Blendtec Tom Dickson Extreme Blender Owners Manual - Page 4

1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE 1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty. 1.9 CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING 1.10 BLADES ARE SHARP! HANDLE CAREFULLY! 1.11 WHEN BLENDING HOT LIQUIDS, THE VENTED LID WILL ALLOW PRESSURE RELIEF. BE CAREFUL NOT TO COME IN CONTACT WITH ANY STEAM COMING FROM THE CLEAR CENTER LID. 1.12 POWER CORD PRECAUTIONS • NEVER operate with a damaged cord or plug. (If the supply cord is damaged it must be replaced by the manufacturer or authorized service agent to avoid a hazard.) • DO NOT permit the cord to hang over the edge of the work surface. • NEVER use an extension cord with the unit. • Unplug the blender motor when not in use, before changing blender locations, or cleaning. 1.13 NEVER ATTEMPT TO REPAIR THE POWER UNIT Never remove the blender motor cover. The blender motor does not contain self-adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty. 1.14 TURN THE POWER SWITCH OFF WHEN NOT IN USE The Power Switch (ON/OFF switch) is located on the front of the blender. 1.15 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE The blender drive socket may become hot after numerous cycles. 1.16 CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN AND PERSONS WITH REDUCED CAPABILITIES. Further, children and persons with reduced capabilities should not play with the appliance at any time. 1.17 THE TOM DICKSON EXTREME BLENDER™ IS INTENDED FOR HOME USE ONLY! ANY USE OF THE BLENDER FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES. SAVE THESE INSTRUCTIONS 2