Bosch B26FT70SNS Instructions for Use - Page 24
light - repair
View all Bosch B26FT70SNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
en Cleaning the water collecting tray Spilled water collects in the water collecting tray. Remove the strainer to empty and clean. Wipe out the water collecting tray with a sponge or absorbent cloth. 2. Empty the ice cube container and clean with lukewarm water. 3. Reach between the openings of the cover, carefully unhook the front 4 notches and pull out the cover. 3. Thoroughly dry the container and screw conveyor to prevent new ice cubes from sticking. Inserting the ice cube container 4. Push the ice cube container all the way back onto the supports until it locks into position. 4. Remove the special humidity filter. Cleaning the ice cube container Ice cubes will shrink, have a stale taste and stick together if they have not been dispensed for an extended period of time. CAUTION Risk of injury! A fully filled ice cube container is very heavy. Use caution when removing the ice cube container. 1. Press the release button and remove the ice cube container. NOTICE If the container cannot be pushed all the way back, twist the screw conveyor slightly or remove any ice cubes that may have stuck to the insertion area. Removing special humidity filter 1. Pull out Vita Fresh drawers by approx. 4 inches (approx. 10 cm). 2. Flip up the glas plate above the Vita Fresh drawers and take them out. 5. Clean the special humidity filter with lukewarm water and let it dry. 6. Inser the special humidity filter. 7. Reattach the rear of the cover, move it down and make sure the front part engages. 8. Insert the glass plate and close the Vita Fresh drawers. LED light The appliance features a maintenance−free LED light. CAUTION Risk of eye injury from Class 1M laser light (IEC 60825)! Do not look directly into the light with optical instruments. These lights must be repaired by customer service or authorized technicians only. 24