Bosch B36IB70NSP Installation Instructions - Page 13
Installation, instructions - ice maker parts
View all Bosch B36IB70NSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation instructions 1. Checking the installation cavity d CAUTION d To ensure a safe, troubleĆfree installation and an optimum overall view of the subsequent furniture front, thoroughly check that the installation cavity complies with the installation requirements. Before starting the installation, check that the installation cavity complies with all requirements for a safe and troubleĆfree installation. q Check the base. Follow the instructions in the section on Installation location" on page 7. q Check the dimensions of the cavity. q Check that the cavity is square. q Check location of the socket. Also follow the instructions in the section on Connecting the power" on page 8 and in the section on Installation dimensions" on page 9. q Check location of the water connection. (only for appliances with ice maker) Also follow the instructions in the section on Connecting the water" on page 8. q Check attachment of the adjacent furniture/fixtures. All furniture parts in the vicinity of the appliance must be connected securely to the wall. q Check that adjacent furniture/fixtures do not collide (door opening angle). 2.. Transport of the appliance d CAUTION d The appliance is very heavy. Be careful, otherwise people who are helping may be injured or the appliance may be damaged. q Transport the appliance to a suitable installation location with suitable means of transportation (trolley, lifting truck or handĆdriven truck). q Secure the appliance during transportation to prevent it from overturning. The appliance is 2134 mm tall. If the appliance cannot be transported in an upright position due to the structural conditions, the appliance can be transported horizontally. When erecting the appliance, observe the required minimum height at the installation location according to the following table: Appliance width Erection via appliance rear Erection via appliance side panel 36" / 914 mm 86" / 2185 mm 911/4" / 2315 mm 3. Removing the packaging d WARNING d - The appliance may tip over while it is being unpacked. - The appliance is very heavy. - When opening the appliance door, the appliance may tip forwards. Be careful, otherwise people who are helping may be injured or the appliance may be damaged. To protect the base from damage during installation: q Attach a residual piece of carpet, lino, etc. to the floor with adhesive tape in front of the intended installation location. q Move the appliance with a hand truck securely. 13