Bosch B36IB70NSP Installation Instructions - Page 17

not had time - manual

Get Bosch B36IB70NSP PDF manuals and user guides View all Bosch B36IB70NSP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Wood floor application Use the wooden screws provided, see overview diagram Use the screws in the screws set". q Drill pilot holes: 1/8" (3 mm) for the (5 x 60 mm) wooden screws 5/64" (2 mm) for the (4 x 15 mm) wooden screws Being certain the screws penetrate through the flooring and into the wall plate a minimum of 3/4" (19 mm). q Attach the antiĆtipĆbracket completely. Be sure screws hold tight. Use concrete anchor M8 and M8 srew. Additional use the wooden screws provided, see overview diagram Use the screws in the screws set". q Drill a 10 mm diameter hole any depth exceeding the minimum embedment. Use the provided drill. q Clean hole or continue drilling additional depth. q Manually insert the screw into the wall plug until the screw begins to resist. q Knock the wall plug and screw into the hole until the screw head is approx. ½" (13 mm) from the antiĆtip bracket. i The distance D between the antiĆtipĆbrackets is adequately the width of the appliance. Concrete floor applications d CAUTION d Always wear safety glasses and other necessary protective devices or apparel when installing or working with anchors ć risk of injury! Not recommended for use in lightĆweight masonry material such as block or brick. Not recommended for use in new concrete which has not had time to cure. Do not use core drills to drill holes for this anchor. i The distance D between the antiĆtipĆbrackets is adequately the width of the appliance. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
17
Wood
floor application
Use the wooden
screws
provided,
see
overview
diagram
²Use
the screws
in
the
screws
set".
q
Drill
pilot
holes:
1
/
8
" (3
mm)
for the (5
x
60
mm)
wooden
screws
5
/
64
"
(2
mm)
for the
(4
x
15
mm)
wooden
screws
Being
certain
the screws
penetrate
through
the±flooring
and into
the
wall plate
a
minimum
of±
3
/
4
"±(19±mm).
q
Attach
the
antiĆtipĆbracket
completely.
Be
sure
screws
hold tight.
i
The distance
D
between
the
antiĆtipĆbrackets
is
adequately the
width
of
the
appliance.
Concrete floor applications
d
CAUTION
d
Always wear safety glasses
and
other
necessary
protective
devices
or
apparel when
installing
or
working
with
anchors
ć
risk±of
injury!
Not
recommended
for
use
in
lightĆweight
masonry
material such
as
block
or
brick.
Not
recommended
for
use
in
new
concrete
which has
not had time
to
cure.
Do
not use
core
drills
to
drill holes
for
this
anchor.
Use
concrete anchor
M8
and
M8
srew. Additional
use
the wooden screws
provided, see overview
diagram
²Use the screws
in the screws
set".
q
Drill a 10
mm
diameter
hole any
depth
exceeding
the minimum
embedment. Use
the provided drill.
q
Clean hole or
continue drilling
additional
depth.
q
Manually
insert the screw
into
the wall
plug until
the
screw
begins to
resist.
q
Knock
the wall plug
and
screw
into
the
hole
until
the
screw
head
is approx. ½"
(13
mm)
from the
antiĆtip
bracket.
i
The distance
D
between the antiĆtipĆbrackets
is
adequately
the width of
the appliance.