Bosch HBL8651UC Installation Instructions - Page 6
Dimensions and Cabinet Requirements, Removing Packaging - wall oven
View all Bosch HBL8651UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Dimensions and Cabinet Requirements Cabinet requirements vary depending on the model to be installed. Please consult the "Cabinet Dimension Requirements" section at the back of this installation manual for the details pertaining to your particular model. All models require: • 1/4" (6.4 mm) space between the side of the oven and an adjacent wall or cabinet door when installed at the end of a cabinet run. • Installation of 2x4's extending front to back flush with the bottom and side of the opening to provide oven support. This supporting base must be well secured to the floor/cabinet and must be level. • The electrical conduit box must be located above the unit to facilitate connecting and servicing the unit. • The cabinet base must be flat and capable of supporting the weight of your oven when in use (varies by model up to 429 lbs. (195 kg)). See the appropriate weight for your model in the "Cabinet Dimensions Requirements" section at the back of this installation manual. Removing Packaging • Cut straps on outside of box. • Remove cardboard box. • Remove all top and side cardboard and Styrofoam braces. • Place oven in front of cabinets where it is to be installed. • Unscrew unit from Left and Right Brackets as show in "Left and Right Packaging Bracket Removal." Left Packaging Bracket Removal Right Packaging Bracket Removal Note: Different models use different packaging materials. Actual brackets may look differently. Bracket remains in packaging base. Unit should stay on packaging base until ready to be lifted into cabinet cutout. Preparing Oven Place oven in front of cabinets where it is to be installed. Rest it on a sturdy support so that it is in line with the cabinet cutout. English 3