Bosch Hamburg MP57 Operating Instructions - Page 22

DEUTSCH SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Tuner mode each. The FM waveband features 3 memory banks each with 5 memory locations each: FM1, FM2 and FMT. u In the "TUNER" menu, press the BAND button 2 to switch between the wavebands or memory banks: FM1 FM2 FMT MW LW You can now perform the following actions in this waveband/memory bank: • Tuning into a station • Storing stations Tuning into a station There are three ways of tuning into a station: • Tuning into stations automatically (sta- tion seek tuning) • Tuning into stations manually • Selecting stored stations Station seek tuning u Press the rocker switch or =. If you press and hold the rocker switch or =, automatic seek tuning skips the stations found until you release the rocker switch again. The tuner searches for the next receivable station in the current waveband. The adjusted sensitivity of the station seek tuning (section "Changing the seek tun- ing sensitivity") and your settings are taken into consideration: • The "PTY ON" setting in the "TUNER" menu: The tuner searches for stations that are broadcasting the defined programme type. • Setting (TRAF button ; press short): The tuner sets only traffic information stations. Note: These settings are available only for FM. An exact description of these settings can be found in the following sections of this chapter. Tuning into stations manually Notes: • Tuning into stations manually is pos- sible only if the convenient RDS function is deactivated. • If you activated the "RDS ON" setting (TRAF button ; press long), you can scroll through broadcasting networks that have previously been received with this device. To change the frequency in increments of 100 kHz: u Press the rocker switch or :. Selecting stored stations u Select the desired waveband or memory bank with the BAND button 2. u Press one of the station buttons 9. 83