Bosch PGL985UC Operating Instructions - Page 17
From natural gas to propane, Gas type changing - ratings
UPC - 825225853084
View all Bosch PGL985UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
IMPORTANT INFORMATION Gas type changing: From natural gas to propane It is necessary that all operations related with installation, adjustment or adaptation LP gas be performed by authorized personnel of our Technical Service, and that the regulations in force, as well as the requisites of the gas companies, be followed. IMPORTANT: Before you begin, turn off the gas and electricity supply to the appliance. Before connecting up the appliance to the installation, first check that it has been adjusted for the type of gas that is to be supplied. Our cooktops are delivered from factory prepared to operate with the gas type indicated on the specifications plate. The propane gas tank must be equipped with its own high pressure regulator in addition to the pressure regulator supplied with this unit. Supply Pressure Natural Gas - 7" wc (17.5 mbar) minimum. Propane Gas - 11" wc (27.4 mbar) minimum. The maximum supply pressure to this appliance shall not exceed 14" water column (34.9 mbar). This cooktop can be adapted to work with LP gas. To do so, the following procedures must be completed: A) Change of cooktop burner tips. (See table1). T ABLE 1 Burner data The burner must be used with the G A S gases indicated on the TYPE specifications plate. NATURAL PROPANE Gas pressure for use Burner Burner tip marker Rapid Consumption Rated (Hs) BTU/hr 6" 133 10.000 10" 95 10.000 Burner semirapid Burner tip marker Consumption Rated (Hs) BTU/hr 110 7.000 77 7.000 Burner Auxiliary Burner tip marker Consumption Rated (Hs) BTU/hr 98 5.500 69 5.500 Large Burner tip marker Burner Consumption Rated Triple-flame (Hs) BTU/hr 106/81 15.300 72/55 15.300 Figure 4 Figure 5 1 - Remove the grates, covers and the main body of the burner. 2 - Change the burner tips using a 7 mm socket wrench and make sure that they are tightened all the way in order to ensure that they are correctly sealed. Figure 4. The adjustment of primary air must not be performed on these burners. B) Reduced consumption adjustment of the cooktop burner taps. 1 - Set the taps to the minimum setting. 2 - Remove the control knobs from the taps. Figure 5. 3 - Remove the anti-spillage disc seals. 7 mm. 17