Bosch PGL985UC Operating Instructions - Page 7

Before the first, start-up, For appliance usage - installation

Page 7 highlights

Before the first start-up Remove the packaging from the appliance and dispose of it as per local laws. Remember that there are other accessories in addition to packaging materials. Keep packaging materials and plastic bags out of the reach of children. Check the condition of the appliance before installing it, to ensure that it has suffered no damage during transport. Only authorized technical personnel must install and connect the appliance before its first start-up in compliance with the regulations of the gas supplier companies and local. Turn the control dials to before connecting the appliance to the current supply. The appliance's serial number is indicated on the control slip annexed to this manual. For warranty purposes, keep this note together with the usage and assembly instructions. Carefully read the assembly and usage instructions before starting up the appliance. Keep the ventilation channels open. Prolonged use of the appliance with several or all cooking units may require additional ventilation, such as opening a window or a door or more intensive extraction of air with an extraction hood. To guarantee good combustion, the room in which the appliance is installed must have a minimum volume of 1240 cft (35 m3) and must possess a door that opens outdoors or a window that can opened. The use of spit-roasters, pans or grilling stones simultaneously by more than one burner is prohibited, as the accumulation of heat could damage the appliance. If large pots are used, a minimum separation of approximately 50 mm (2") should be kept between the pot and peripheral inflammable materials. A minimum separation of some 50 mm (2") should be kept between the control dial or control panel and the pot or pan. The cooking pot must not touch the control panel. Thoroughly clean the appliance and accessories when using them for the first time. If pots or pans are removed temporarily, This will eliminate any "new" scents and any set the stovetop to the minimum setting. remaining dirtiness (see cleaning and care This will reduce the risk of suffering burns chapter). while working near open flames; in addition For appliance usage to saving gas, thus favoring the environment. The use of this gas burning appliance produces If there is a fault in the current supply, do a formation of heat and humidity in the area not use the appliance. of use. Make sure that the area has proper If the appliance does not work properly, ventilation conditions. contact the technical service. BURNER Ø MINIMUM PAN SIZE Large triple-flame burner (Center) 9" Rapid burner (Left front) 9" Semi-rapid (Right front) (Right rear) 6" Auxiliary (Left front) 5" Ø MAXIMUM PAN SIZE 10" 8" 6" 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

7
Remove the packaging from the appliance
and dispose of it as per local laws. Remember
that there are other accessories in addition to
packaging materials. Keep packaging materials
Check the condition of the appliance before
installing it, to ensure that it has suffered no
damage during transport.
its first start-up in compliance with the
regulations of the gas supplier companies and
the appliance to the current supply.
The appliance's serial number is indicated on
the control slip annexed to this manual. For
warranty purposes, keep this note together
with the usage and assembly instructions.
Carefully read the assembly and usage
instructions before starting up the appliance.
Thoroughly clean the appliance and
accessories when using them for the first time.
This will eliminate any "new" scents and any
remaining dirtiness (see cleaning and care
chapter).
The use of this gas burning appliance produces
a formation of heat and humidity in the area
of use. Make sure that the area has proper
ventilation conditions.
Before the first
start-up
For appliance usage
BURNER
9”
9”
10”
6”
8”
Auxiliary
5”
6”
Keep the ventilation channels open.
Prolonged use of the appliance with several
or all cooking units may require additional
ventilation, such as opening a window or a
door or more intensive extraction of air with
an extraction hood.
3
opened.
The use of spit-roasters, pans or grilling
stones simultaneously by more than one
burner is prohibited, as the accumulation of
heat could damage the appliance.
If large pots are used, a minimum separation
of approximately 50 mm (2") should be kept
between the pot and peripheral inflammable
materials. A minimum separation of some
50 mm (2") should be kept between the
control dial or control panel and the pot or
the control panel.
set the stovetop to the minimum setting.
This will reduce the risk of suffering burns
while working near open flames; in addition
to saving gas, thus favoring the environment.
If there is a fault in the current supply, do
not use the appliance.
If the appliance does not work properly,
contact the technical service.
and plastic bags out of the reach of children.
Only authorized technical personnel must
install and connect the appliance before
To guarantee good combustion, the
room in which the appliance is installed
must have a minimum volume of
1240
cft
(35 m
) and must possess a door that
local.
opens outdoors or a window that can
Ø MINIMUM PAN SIZE
Ø MAXIMUM PAN SIZE
pan. The cooking pot must not touch
Large triple-flame burner (Center)
Rapid
burner
(Left
front)
Semi-rapid
(Right
front)
(Right
rear)
(Left front)
Turn the control dials to
before connecting
If pots or pans are removed temporarily,