Bosch TAS5542UC Instructions for Use - Page 9

Mavea - tassimo

Page 9 highlights

en 7 MAVEA MAXTRA water iltration system 1. Only MAVEA MAXTRA water iltration system cartridges may be used in TASSIMO machines. The MAVEA MAXTRA cartridges may be obtained from various retailers or from TASSIMO Customer Service Department at 1-877-TDISCS1 (only in the USA) or on www.tassimo.com. To operate your machine with a new ilter cartridge (5d), proceed as follows: 2. Preparing and inserting the MAVEA MAXTRA ilter cartridge 1. Remove the ilter cartridge (5d) from its protective wrap. 2. Immerse the ilter cartridge (5d) in cold tap water and move it gently back and forth to remove any air bubbles (about 5 seconds). 3. 3. Remove the ilter cartridge holder (5c) from the water tank and insert the ilter cartridge (5d) into the appropriate chamber of the ilter cartridge holder (5c) until it snaps into place with an audible click. 4. 4. Hold the ilter cartridge holder (5c) under the tap, ill it with fresh, cold water and let the water run through the ilter cartridge (5d). Repeat this procedure three times. 3 x TAS55_UC.indb 7 12/2011 16.12.2011 13:45:08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

7
12/2011
en
Only MAVEA
MAXTRA water ±ltration
system cartridges may be used in
TASSIMO machines.
The MAVEA MAXTRA cartridges may
be obtained from various retailers or from
TASSIMO Customer Service Department
at 1-877-TDISCS1 (only in the USA) or on
www.tassimo.com.
To operate your machine with a
new
±lter
cartridge (5d), proceed as follows:
Preparing and inserting the MAVEA
MAXTRA ±lter cartridge
1.
Remove the ±lter cartridge (5d) from its
protective wrap.
2.
Immerse the ±lter cartridge (5d) in cold
tap water and move it gently back and
forth to remove any air bubbles (about
5 seconds).
3.
Remove the ±lter cartridge holder (5c)
from the water tank and insert the
±lter cartridge (5d) into the appropriate
chamber of the ±lter cartridge holder
(5c) until it snaps into place with an
audible click.
4.
Hold the ±lter cartridge holder (5c) un-
der the tap, ±ll it with fresh, cold water
and let the water run through the ±lter
cartridge (5d).
Repeat this procedure
three
times
.
1.
2.
3.
4.
3 x
MAVEA
MAXTRA water ±ltration system
TAS55_UC.indb
7
16.12.2011
13:45:08