Bose 901 Owner's guide - Page 10
Bose 901 Manual
View all Bose 901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
the RIGHT channel EQUALIZER OUTPUT terminal on the Equalizer to the RIGHT or B channel INPUT terminal on your power amplifier. 4. Similarly, use a second cable and connect the LEFT channel EQUALIZER OUTPUT to the LEFT or A channel INPUT terminal on the power amplifier. 5. Using a third cable, connect the RIGHT channel EQUALIZER INPUT terminal on the Equalizer to the RIGHT or B channel OUTPUT terminal on your preamp (the prearnp terminal may alternatively be labeled PREAMP OUT or OUTPUT TO AMPLIFIER). 6. Similarly, using a fourth cable connect the LEFT channel EQUALIZER INPUT terminal to the LEFT or A channel OUTPUT terminal on your preamp. 7. Connect the Equalizer power cord to an AC re- ceptacle. You may prefer to use a receptacle on your preamp so that the Equalizer will be automatically switched on or off by the power switch on the preamp. The Equalizer is now installed in your system. No other connections should be made to the Equalizer. If you have a tape recorder, it is connected to the prearnp in the normal manner described in the preamp and recorder manuals. THE REMAINING STEPS SHOULD BE FOLLOWED TO INSURE PROPER INSTALLATION AND OPERATION. 8. Place the TAPE switch on the Equalizer to the NORMAL position. This switch should be left permanently in this position when the Equalizer is connected as de- scribed in this section. Place the three frequency contour controls so they coincide with the indicated dots. These are the "normal" positions of the controls. 9. Turn the Equalizer and the rest of the system on. The pilot lamp in the Equalizer POWER switch should light. 9 •