Bose 901 Owner's guide - Page 11

various controls

Page 11 highlights

If it doesn't, check the power connection to the Equalizer. • With the Equalizer on, your system should operate normally. If it doesn't, recheck steps 1 through 8. 10. With the system operating, turn the Equalizer POWER switch off. The system should cease to operate. If it still plays, recheck steps 1 through 6. The 901 system is now completely installed and ready for use. The functions of the various controls are described in the next section. VII. Operating the 901 Equalizer Controls The 901 Active Equalizer has a TAPE switch which replaces the function of the TAPE MONITOR switch on your preamplifier or re- ceiver if you have connected the Equalizer as described in Section V. (The Equalizer connected to the tape monitor function on your preamp- li fier or receiver.) In this case, the TAPE switch on the Equalizer is used as described in your preamplifier manual. The TAPE MONITOR switch on the preamplifier should be left in the MONITOR or IN posi- tion permanently,. • If the Equalizer has been connected as described in Section VI (the Equalizer connected between your preamplifier and power amplifier), then the TAPE switch on the Equalizer should be left permanently in the NORMAL position. The function of the TAPE MONITOR switch on your preamplifier has not been disturbed. The Equalizer also features three program contour controls that can be used to adjust for the program source, the acoustic properties of the room and personal taste. These controls are specifically designed to offer flexibility not provided by any controls currently available on high fidelity equipment. The response of the system is flat when all controls are in the positions indicated by the dots. The effects of the remaining positions are described below. BELOW 40 - When this switch is placed in the DECREASE - 10 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

If
it
doesn't,
check
the
power
connection
to
the
Equalizer.
With
the
Equalizer
on,
your
system
should
operate
normally.
If
it
doesn't,
recheck
steps
1
through
8.
10.
With
the
system
operating,
turn
the
Equalizer
POWER
switch
off.
The
system
should
cease
to
operate.
If
it still
plays,
recheck
steps
1
through
6.
The
901
system
is
now
completely
installed
and
ready
for
use.
The
functions
of
the
various controls
are
described
in
the
next
section.
VII.
Operating
the
901
Equalizer
Controls
The
901
Active
Equalizer
has
a
TAPE
switch
which
replaces
the
function
of
the
TAPE
MONITOR
switch
on
your
preamplifier
or
re-
ceiver
if
you
have
connected
the
Equalizer
as
described
in
Section
V.
(The
Equalizer
connected
to
the
tape
monitor
function
on
your
preamp-
li
fier
or
receiver.)
In
this
case,
the
TAPE
switch
on
the
Equalizer
is
used
as
described
in
your
preamplifier
manual.
The
TAPE
MONITOR
switch
on
the
preamplifier
should
be
left
in
the
MONITOR
or
IN
posi-
tion
permanently,.
If
the
Equalizer
has
been
connected
as
described
in
Section
VI
(the
Equalizer
connected
between
your
preamplifier
and
power
amplifier),
then
the
TAPE
switch
on
the
Equalizer
should
be
left
permanently
in
the
NORMAL
position.
The
function
of
the
TAPE
MONITOR
switch
on
your
preamplifier
has
not
been
disturbed.
The
Equalizer
also
features
three
program
contour
controls
that
can
be
used
to
adjust
for
the
program
source,
the
acoustic
proper-
ties
of
the
room
and
personal
taste.
These
controls
are
specifically
designed
to
offer
flexibility
not
provided
by
any
controls
currently
avail-
able
on
high
fidelity
equipment.
The
response
of
the
system
is
flat
when
all
controls
are
in
the
positions
indicated
by
the
dots.
The
effects
of
the
remaining
positions
are
described
below.
BELOW
40
-
When
this
switch
is
placed
in
the
DECREASE
-
10
-