Bose Acoustimass Powered Owner's guide - Page 7
Bose Acoustimass Powered Manual
View all Bose Acoustimass Powered manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 Connect the Acoustimass' bass mod$ o the music source. e Lifestyle's music center re 3): a. Insert the three connectors located at one end of the audio input cable into the jacks on the rear of the music center as follows: -Black connector into the SERIAL DATA OUTPUT jack -Red connector into the ZONE 1, R (right) jack -While connector into the ZONE 1, L (left) jack b. Insert the "DIN" connector located at the other end of the audio input cable into the AUDIO INPUT jack on the Acoustimass hack module, aligning the five pins on the connector with the five holes on the jack. To another source: Note: Remember, any other music source you use (e.g., tuner or tuner/preamp) must have a line level variable output and must also have a volume control. There is no volume control on the Acoustimassa powered speaker system. a. Locate the audio output jacks on your music source, and the three connectors It atedat one endof the suppliedaudio cable. Insert the white connector the jack fa the left channel, arid the red connector into the jack for the right channel. Note: The black connector is not used and can remain hanging. It will not affect the operation of the Acoustimass" powered speaker system. b. Insert the "DIN" connector located at the other end of the audio input cable into the AUDIO INPUT jack on the Acoustimass bass module (see Figure 3), aligning the fwe pins on the connector with the five holes on the jack. .ce -SOWS' a Figure 3. Connecting the Acoustimass bass module to the Lifestyle music center •