Bose Bluetooth Owner's guide - Page 14

Tab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14 English Note: If the Bose headset does not appear in the list, press and hold the Call button on the headset until the Bluetooth light blinks (in about 5 seconds). This makes the headset manually discoverable so it shows up in the list for selection. 4. If your mobile phone asks for a passkey, enter digits 0000 and press OK. Some phones ask you to accept connection, as well. As the two devices connect, the Bluetooth indicator on the headset flashes, then turns solid blue to indicate a successful connection. This light turns off in 30 seconds when paring is done for the first time. To pair an additional phone (up to a total of 6): With the mobile phone and your headset turned on, press and hold the headset call button to make the headset discoverable again. Then follow steps 2 - 4 beginning on page 7. Deleting a no-longer-used phone To make sure the headset no longer connects to an old mobile phone, you can clear the headset memory and then re-pair it to the phones you want. To clear the headset pairing memory, simultaneously press the Call and Volume - buttons for 10 seconds. The headset reverts to discoverable mode, allowing you to re-pair the mobile phone you want connected. 8