Bose Lifestyle 50 Owner's guide - Page 12

Setting Up Figure 8 Speakers, CD changer, and multi-room interface connections Connecting the Acoustimass® module to the multi-room interface Connect the module to the interface with the audio input cable (Figure 8). 1. Insert the right-angle multi-pin connector on the audio input cable into the AUDIO INPUT jack on the module. Align the connector at the angle shown in Figure 8. 2. Plug the small black multi-pin connector (flat side facing up) into the jack marked ROOM A (PRIMARY) on the back of the interface. Note: The female RCA connector on the audio input cable is for connecting the digital output of a DVD player or other digital source to the system. See "Setting up a digital sound source" on page 12. Note: Be sure that each connector is inserted completely into each jack. For information on connecting multi-room systems, see "Connecting additional rooms" on page 40. Connecting the CD changer to the multi-room interface Connect the CD changer to the interface with the CD changer cable (Figure 8). 1. Plug a blue multi-pin connector (flat side facing up) into the jack marked BOSE CD on the back of the interface. 2. Plug the other blue multi-pin connector (flat side facing left) into the jack marked BOSE CD on the back of the CD changer. Note: Be sure that each connector is inserted completely into each jack. Surround speakers Left Right Front speakers Right Center Left AUDIO INPUT Right-angle connector L R R AUDIO INPUT SURROUND RIGHT FRONT RIGHT LEFT CENTER LEFT OUTPUTS TO CUBE SPEAKERS C L CD changer cable ROOM A multi-pin connector ANTENNA FM AM AUX L AUDIO INPUT RECORD VIDEO 1 VIDEO 2 TAPE IN OUT L L L L AUDIO INPUT ROOM A (PRIMARY) ROOM B POWER R R R R R BOSE CD ROOM C ROOM D SERIAL DATA ! SEE USER'S GUIDE 12V AC 1.6A Audio input cable Power jack Digital audio source connector Interface power pack cord 10 October 17, 2001 AM189854_05_V.PDF