Brother International CS-6000/6000b/6000t/6000i Operation Manual - Page 23
Removing the presser foot holder
View all Brother International CS-6000/6000b/6000t/6000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the disc-shaped screwdriver to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. (Refer to page 20.) a Loosen the presser foot holder screw. b a Disc-shaped screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lower-left a side of the presser bar. a Presser foot holder b Presser bar Holding the presser foot holder in place, tighten b the screw. Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. 1 21