Brother International CS-6000/6000b/6000t/6000i Operation Manual - Page 6
Knowing Your Sewing Machine
View all Brother International CS-6000/6000b/6000t/6000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
KNOWING YOUR SEWING MACHINE 1 KNOWING YOUR SEWING MACHINE NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The main parts i Operation buttons (page 5) j Operation panel (page 5) k Handwheel Used to manually raise and lower the needle. l Air vent This vent allows the air surrounding the motor to circulate. Do not cover the air vent while the sewing machine is being used. m Main power and sewing light switch (page 7) n Jack/socket connector (page 7) o Foot controller (page 7) p Foot controller jack/socket (page 7) q Feed dog position lever (pages 33 and 39) r Presser foot lever (page 13) s Handle Carry the sewing machine by its handle when transporting the machine. Needle and presser foot section a Bobbin winder (page 9) b Spool pin (pages 9 and 13) c Hole for extra spool pin (page 19) d Upper tension-control dial (page 25) e Thread guide (pages 9 and 13) f Thread take-up lever (page 14) g Thread cutter (page 24) h Flat bed attachment with accessory compartment (pages 5 and 27) 4 a Buttonhole lever (page 31, 40) b Needle threader (for models equipped with the needle threader) (page 15) c Presser foot holder The presser foot is installed onto the presser foot holder. d Presser foot holder screw Use the presser foot holder screw to hold the presser foot holder in place. e Presser foot The presser foot applies pressure consistently on the fabric as the sewing takes place. Attach the appropriate presser foot for the selected stitching. f Feed dogs The feed dogs feed the fabric in the sewing direction. g Quick-set bobbin (for models equipped with the quick-set bobbin) You can start sewing without pulling up the bobbin thread. h Bobbin cover